Ultra-Realistic Squirting Dildo — Platinum Silicone, Vein & Skin-Fold Texture, Balls Base, 3-Way Ejaculation System

Anatomically Precise. Functionally Complete. The Squirting Dildo That Delivers.

Three ejaculation methods. One anatomy-accurate platinum silicone build. The Domlust Ultra-Realistic Squirting Dildo is designed around a single principle: nothing should break the illusion — not the surface, not the weight, not the finish.

THE ANATOMY

The shaft is cast in platinum silicone from a body-accurate mould. Raised veins — blue-mapped and red-threaded — trace the full length in relief. The skin surface carries the fine fold and crease detail of real tissue rather than a smooth or patterned approximation. The glans is a deeper rose-coral shade, anatomically proportioned with a defined urethral opening at the centre — this is the ejaculation point. At the base: two full-form testicles in a deeper rose-red textured silicone, mounted on a wide flared suction base.

The ejaculation tube runs from the base, through the interior of the shaft, and exits at the urethral tip. The tube is flush against the base and connects to three included ejaculation tools.

THREE WAYS TO EJACULATE

All three connect to the same tube fitting at the base. Fill with water or water-based fluid, connect, and use. No internal reservoir — the tube is external and food-safe.

SUCTION BASE + THE TESTICLE FORM

The base is a wide-flared silicone disc with a suction cup underneath. The testicle forms sit proud of the shaft base — their deeper rose-red colour and rougher surface texture is a deliberate contrast to the flesh-tone shaft. They are solid platinum silicone, not hollow. The testicle mass at the base adds visual and tactile weight. The base flare is wide enough that the toy stands without the suction engaged.

SPECIFICATIONS

QUESTIONS OWNERS ASK

“How much liquid does each ejaculation method deliver, and can I control the amount?”

The volume delivered depends on which tool you use. The 100ml syringe gives the most precise control — you can fill it to any volume from 5ml upward and push at whatever speed you choose, from a slow continuous flow to a single fast burst. The bulb pump is less precise but delivers a consistent single squeeze volume; multiple squeezes can be chained. The electric water gun delivers a sustained motorised flow for as long as the reservoir has fluid and the button is held. For users who want a specific “moment” of ejaculation, the syringe is the most controllable. For sustained use, the electric pump is most practical.

“The veins look raised in the images — are they a surface print, or do they actually have a physical texture you can feel?”

The veins are structural, not printed. They are cast as raised relief into the platinum silicone mould — the blue-mapped and red-threaded veins stand above the surface of the shaft. During use, the raised veins create a directional texture along the length of the shaft. They are not symmetrically distributed — some veins run lengthwise, some branch, some are fine and some are thick — which means the texture is irregular and varied rather than repeating. The skin fold detail between and around the veins also has physical depth. The surface of this shaft is textured throughout its length, with no smooth sections.

“The testicles are a noticeably different colour from the shaft — is the colouring accurate to the product, or is it variation between units?”

The deeper rose-red colouring of the testicles is intentional and consistent across all units. They are cast with a different pigment concentration from the shaft — the shaft is a lighter natural flesh tone and the testicles are a more saturated deep rose-red. The surface texture of the testicles is also intentionally different: rougher and with a more pronounced fold pattern. The contrast is a design feature, not variation. The glans is a third distinct colour — rose-coral, deeper than the shaft but lighter than the testicles — making the toy three-tone in total.

“Can I use the electric water gun for extended sessions without refilling, and how loud is it?”

The electric water gun operates from its own reservoir, which determines how long a single fill lasts. At moderate flow setting, a full reservoir supports several minutes of continuous use. The device has multiple flow modes — normal, soft, and pulse — which affect both delivery feel and consumption rate. The pulse mode is designed for intermittent rather than continuous flow. Operating noise is at a level comparable to a small electric appliance; it is audible in a quiet room. If noise is a consideration, the syringe or bulb pump are both silent.

“Can water-based lubricant be used through the ejaculation system, or does it have to be plain water?”

Water-based lubricant can be diluted and used through the ejaculation tube — a diluted mixture (roughly one part lubricant to three or four parts water) flows through the system without clogging and produces a more viscous ejaculate feel compared to plain water. Do not use undiluted thick lubricant, as it may not flow freely through the tube fitting. Do not use silicone-based lubricant on the toy surface or through the tube. After use with any lubricant mixture, flush the tube with clean warm water before storage to prevent residue buildup.

“The suction base looks wide — does it stay stable on a bed or soft surface, or does it only work on hard floors and tiles?”

The suction cup requires a smooth, non-porous surface to seal — it will not function on fabric, carpet, bedding, or textured surfaces. On hard smooth surfaces (floor tiles, glass tables, bathroom floors, mirrors), it holds reliably. On a soft surface like a bed or mattress, the suction cup will not engage; the toy can still be used on soft surfaces held manually, as the wide flared base provides a stable flat resting footprint. The testicle mass at the base also adds weight that helps stabilise the toy on flat surfaces without suction engaged.